Technical features:

• Input supply 230VAC 1-phase 50/60 Hz
• BOX DIMENSIONS (mm)
• "S" 500 (L) x 400 (W) x 800 (H)
• "N" 500 (L) x 400 (W) x 1000 (H)
• "L" 600 (L) x 500 (W) x 1100 (H)
• - Standard colour : red to RAL 3000
• - Equipped with mains and battery cables

Single-phase battery charger with Wa charging characteristic
• Digital display with readout of charging data.

Technical features:

• Single-phase input supply 230 VAC – Frequency 50/60Hz.
• Possible adjustments to 220/230/240 VAC.
• New electronic controller with AP735W card with microprocessor.
• New Software with Ah-control of the charging process.
• Polycarbonate plate with symbols easy and immediate to interpret.
• Complete switching off of charger, if it is disconnected from battery during the charging process.
• LEDs signalling the charging stages of failures, if any.
• Suitable for rated battery voltages from 12V to 96V, selectable by means of jumpers and possibility to set different values with 2V-steps.
• Trimmer for setting the threshold at 2.40V/cell.
• In the four-digit LCD with 12 multifunctional symbols, charging parameters can be recalled by means of the external ON-OFF button:
1. current delivered in real time
2. instantaneous voltage at battery terminals
3. initial battery voltage at the beginning of charging process
4. end of charge battery voltage
5. current at the beginning of the charging process
6. current at the end of charging process
7. delivered ampere-hours
8. overall charging time
• The following charging parameters can be programmed by means of DIP switches/jumpers:
1. Autostart
2. Final charge time
3. Safety timer
4. Equalizing charge
5. Proportional charge

Technical features:

• Single-phase input supply 230 VAC – Frequency 50/60Hz.
• Possible adjustments to 220/230/240 VAC.
• New electronic controller with AP070 card with microprocessor. Input supply from mains: 110V/230V.
• 4 LEDs signalling the charge status or possible faults.
• Lab-tested electronic circuit conforming to Directive on Electromagnetic Compatibility and CE marking.
• Suitable for rated battery voltages from 12V to 96V, selectable by means of jumpers.
• Trimmer for setting the threshold at 2.40V/cell.
• DIP switches to select and adjust the charging parameters:
1. Autostart
2. Final charge time
3. Quick test
4. Equalizing charge
5. Proportional charge
6. Charge reset due to battery disconnection

Hawker provides a wide range of advanced charging systems for all traction battery applications. All chargers are equipped with microprocessors to control the charging process. Tough powder paint coatings and electrolyte resistant membrane keypads are, of course, standard, as is full CE conformity.

Hawker tronic E puls / E-EU, digital E and multi E ranges are equipped with data memory and IRcomm interface for downloading the data records on PC.

Hawker provides a wide range of advanced charging systems for all traction battery applications. All chargers are equipped with microprocessors to control the charging process. Tough powder paint coatings and electrolyte resistant membrane keypads are, of course, standard, as is full CE conformity.

LED displays provide an at-a-glance view of the state of charge.